You will need two panels from one sheet and one panel from the second sheet. Cut the panels 92” long and at least 37-1/2” wide. They can be wider, if possible, for more gathers in the finished project. On the two long sides of each panel, fold over the edge 1/2” and then fold it again. Press with an iron, if necessary to hold it in place, and pin about 6” apart. Sew a seam along the fold very close to the edge.
On the two short sides of each panel, use a seam gauge to fold over 4” and press in place. Fold the top edge of the fold over 1/2” and pin in place. Sew a seam along the fold very close to the edge, backstitching at the beginning and end of the seam. Remove any excess threads.
Landscape designer Scot Eckley and his team cut about 200 rings from various PVC pipes to create a template for the gate. A metal fabricator duplicated the design using aluminum rings cut and welded into one solid piece.
Knowing few people take the time to formally hang their clothes during a trip to the beach, designer Kristina Crestin opted to add a minimalistic, open closet space in the master bedroom of this beach house. Shelves and bins make for easy spots to toss bathing suits and t-shirts. The brass stool on the floor is more than meets the eye. It's concealing a PVC pipe that couldn't be removed and had to remain accessible for plumbing purposes.
To get the look of this high-end bar cart on a budget, start with a basic metal or wire shelving unit, says Michiel Perry, founder of Black Southern Belle. Spray paint it your desired color. To add the lattice and bamboo trim, use a piece of vinyl diamond lattice, which you often see on outdoor decks and fences. Use bendable PVC pipe that is spray painted to match or in an accent color, for the trim.